Servo motors - Dynamic series
Motors of AM and M series are motors with low moment of inertia, small section of the frame and long axial length of the motor (long motors). Cooling is achieved by natural convection. Motors of the type AMW, W adapted for water cooling, bringing about higher values of continuous torque and power output. The series consists of the motors of AML and ML series, provided with separate ventilation for achieving higher values of continuous torque and power output. All of the servo motors we offer are made by VUES Brno a.s.
AM series
- Dynamic series of servomotors with low moment of inertia
- Standstill torque M0 = 0,5 - 140 Nm
- Insulation class H
- Shaft heights 25 - 112 (AM25 - AM112)
M series
- Dynamic series of servomotors with low moment of inertia
- Standstill torque M0 = 0,5 - 55 Nm
- Insulation class F
- Shaft heights 25 - 90 (M25 - M90)
AMW series
- Dynamic series of servomotors with low moment of inertia with water cooling
- Standstill torque M0 = 1 - 137 Nm
- Insulation class H
- Shaft heights 25 - 90 (AMW 25 - AMW 90)
W series
- Dynamic series of servomotors with low moment of inertian with water cooling
- Standstill torque M0 = 1 - 137 Nm
- Insulation class F
- Shaft heights 25 - 90 (W 25 - W 90)
AML series
- Dynamic series of servomotors with low moment of inertia with separate ventilation
- Standstill torque M0 = 1,7 - 85 Nm
- Insulation class H
- Shaft heights 40 - 90 (ML 40 - ML 90)
ML series
- Dynamic series of servomotors with low moment of inertia with separate ventilation
- Standstill torque M0 = 1,2 - 85 Nm
- Insulation class F
- Shaft heights 40 - 90 (ML 40 - ML 90)
